ZX190W-6
Wheeled Excavator
Net Power
129 kW
173 hp
Operating Weight
20 500 kg
45,300 lb.
Max Dig Reach
9.48 m
31 ft. 1 in.
Max Dig Depth
5.93 m
19 ft. 5 in.
Roll over tough jobs.
Mobile and maneuverable, the ZX190W-6 is ready to roll on your jobsites. It quietly goes about its business with a powerful, fuel-efficient Final Tier 4 (FT4)/EU Stage IV Isuzu diesel engine that features an improved piston design and does not require a diesel particulate filter (DPF). A redesigned counterweight enhances visibility and features like the HIOS IV half-lever control for hydraulic flow and fuel consumption contribute to efficiency. Plus, trailer-free travel makes transportation to your next job easy.
The ZX190W-6 comes standard equipped with five years of ZXLink™ Ultimate, giving you 24/7 online access to machine location, health, utilization, fuel consumption and other valuable information – so you can better understand costs and jobsite performance.
Downloads
Features and Specs BrochureFeatures
Engine
- The fuel-efficient Final Tier 4 (FT4)/EU Stage IV Isuzu engine does not require a DPF, saving service time and lowering operating costs.
- Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.
Durable structure and undercarriage
A standard, larger blade cylinder cover better protects the blade lift cylinder.
A redesigned counterweight with LED lights and rearview camera enhance jobsite visibility.
- Sound absorption pads mounted on the rear pump compartment are more durable and maintenance-free.
- The short wheelbase is perfect in tight quarters, and dual Bridgestone tires come with a spacer ring to help keep out dirt and debris.
- Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.
- Reinforced D-channel side frames provide maximum cab and component impact protection.
- Tungsten-carbide-coated wear surfaces protect the critical bucket-to-arm joint.
- Reinforced resin thrust plates and an exclusive double-seal swing bearing deliver rock-solid durability.
Hydraulics
- HIOS IV half-lever technology contributes to fuel efficiency by delivering on-demand performance and the right amount of pump flow when metering pilot controls.
- The power dig function gives you an extra dose of hydraulic pressure to muscle through tough jobs.
- Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.
- The ZX190W-6 comes standard equipped with low-flow medium-pressure auxiliary lines that make installing and operating attachments simple and convenient.
Simple controls
Ergonomically correct short-throw pilot levers provide smooth, precise control with less effort.
Multi-language LCD monitor and rotary dial provide easy access to machine info and functions. Turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes and set cab temperature.
- Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.
- The Forward-Neutral-Reverse (F-N-R) switch is conveniently located on the left pilot lever.
Comfortable cab
- The durable cab meets the ISO standard for rollover protective structure (ROPS) certification.
- Operators will appreciate the wide entryway, fully adjustable high-back sculpted seat, storage space and generous legroom.
Easy to maintain
Centrally located engine oil filter, pilot and steering filters, and fuel filters allow for quick and easy servicing.
- Easy-to-navigate LCD monitor tracks various fluid levels and issues scheduled maintenance alerts and diagnostic information.
- Ground level inspections are simple with easy access to the washer tank, air cleaner, DEF tank and battery disconnect switch.
- Convenient upperstructure handrails and a larger hood provide easy access to the engine.
- A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.
ZXLink™
- The ZX190W-6 is standard equipped with 188博金宝下载 ’s ZXLink™ system, giving you the power to optimize your operation and maximize your profits. With the support of your dealer, you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat, you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.
Specifications
Driveline
Emission Rating
Tier 4
Engine Manufacturer
Isuzu
Number Of Cylinders
4
Displacement
5.2 ltr
317 Inches³
317 Inches³
Rated Speed
1800 rpm
Engine Output - Net
129 kW
173 hp
173 hp
Tyre Size - Standard
10.00-20
Dimensions
Transport Length - Mono Boom
9480 mm
31 ft 1 in ft/in
31 ft 1 in ft/in
Transport Height - Over Mono Boom
3120 mm
10 ft 3 in ft/in
10 ft 3 in ft/in
Overall Width
2730 mm
8 ft 11 in ft/in
8 ft 11 in ft/in
Tailswing Radius
2320 mm
7 ft 7 in ft/in
7 ft 7 in ft/in
Wheelbase
2650 mm
8 ft 8 in ft/in
8 ft 8 in ft/in
Cab Height
3220 mm
10 ft 7 in ft/in
10 ft 7 in ft/in
Ground Clearance
350 mm
14 inches
14 inches
Digging Reach - Mono Boom
9580 mm
31 ft 5 in ft/in
31 ft 5 in ft/in
Ground Level Reach - Mono Boom
9400 mm
30 ft 10 in ft/in
30 ft 10 in ft/in
Dig depth - 2.44m / 8'ft flat bottom Mono
5640 mm
18 ft 6 in ft/in
18 ft 6 in ft/in
Dig Depth - Mono Boom
5830 mm
19 ft 2 in ft/in
19 ft 2 in ft/in
Dozer Blade
Parallel action
Capacities
Fuel Tank
290 ltr
77 gallons (US)
77 gallons (US)
Hydraulic Tank
100 ltr
26 gallons (US)
26 gallons (US)
Battery Voltage
24 V
Slew Speed
11.5 rpm
Slew Torque
53 kNm
39090 lbf / ft
39090 lbf / ft
Tractive Force
93.5 kN
21020 lbf
21020 lbf
Gradeability
35 / 70 °
Weights
Operating Weight
19700 kg
43431 lbs
43431 lbs
Gallery
Customize your solution.